![background image](http://html.mh-extra.com/html/icom/ic-7410/ic-7410_instruction-manual_612268112.webp)
105
CONTROL COMMAND
14
D
Command table (continued)
Cmd. Sub cmd.
Data
Description
1A
05 0074
00
Send/read Normal selection for paddle po-
larity
01
Send/read Reverse selection for paddle
polarity
0075
00
Send/read Straight selection for keyer type
01
Send/read BUG-Key selection for keyer
type
02
Send/read ELEC-Key selection for keyer
type
0076
00
Send/read Mic. up/down keyer OFF
01
Send/read Mic. up/down keyer ON
0077
00
Send/read 1275 Hz selection for RTTY
mark frequency
01
Send/read 1615 Hz selection for RTTY
mark frequency
02
Send/read 2125 Hz selection for RTTY
mark frequency
0078
00
Send/read 170 Hz selection for RTTY shift
width
01
Send/read 200 Hz selection for RTTY shift
width
02
Send/read 425 Hz selection for RTTY shift
width
0079
00
Send/read Normal selection for RTTY key-
ing polarity
01
Send/read Reverse selection for RTTY
keying polarity
0080
00
Send/read RTTY decode USOS OFF
01
Send/read RTTY decode USOS ON
0081
00
Send/read “CR,LF,CR+LF” selection for
RTTY decode new line code
01
Send/read “CR+LF” selection for RTTY
decode new line code
0082
00
Send/read 2 lines selection for number of
RTTY decoder line
01
Send/read 3 lines selection for number of
RTTY decoder line
0083
00
Send/read Scan speed low
01
Send/read Scan speed high
0084
00
Send/read Scan resume OFF
01
Send/read Scan resume ON
0085 00 to 09 Send/read NB depth
(00=1 to 09=10)
0086
0000 to
0255
Send/read NB width
(0000=1 to 0255=100)
0087
0000 to
0255
Send/read VOX gain
(0000=0% to 0255=100%)
0088
0000 to
0255
Send/read ANTI-VOX gain
(0000=0% to 0255=100%)
0089 00 to 20 Send/read VOX delay time
(00=0.0 sec. to 20=2.0 sec.)
0090
00
Send/read VOX voice delay OFF
01
Send/read Short selection for VOX voice
delay
02
Send/read Mid selection for VOX voice
delay
03
Send/read Long selection for VOX voice
delay
06
see p. 108 Send/read DATA mode selection
Cmd. Sub cmd.
Data
Description
1B
00
see p. 108 Send/read Repeater tone frequency
01
see p. 108 Send/read Tone squelch frequency
1C
00
00
Send/read Transceiver’s status (RX)
01
Send/read Transceiver’s status (TX)
01
00
Send/read Antenna tuner OFF (through)
01
Send/read Antenna tuner ON
02
Send/read Manual tuning selection
02
00
Send/read Transmit frequency monitor
check OFF
01
Send/read Transmit frequency monitor
check ON
1E
00
Read number of available TX frequency
band
01
see p. 106 Read TX band edge frequencies
02
Read number of user-set TX frequency
band
03
see p. 106 Send/read User-set TX band edge fre-
quencies