![background image](http://html.mh-extra.com/html/icom/ic-7410/ic-7410_instruction-manual_612268014.webp)
$8
MEMO PAD-WRITE SWITCH [MP-W]
(p. 74)
Push to write the displayed data into a memo pad.
• The five most recent entries remain in the memo pads.
• The memo pad capacity can be extended from 5 to
10 in the “Memopad Numbers” item in the Set mode.
(p. 87)
$9
VFO/MEMORY SWITCH [VFO/MEMO]
➥
Push to switch between the VFO and Memory
modes. (p. 24)
➥
Hold down for 1 second to transfer the memory
contents to the displayed VFO. (p. 72)
%0
MEMO PAD-READ SWITCH [MP-R]
(p. 74)
Push to sequentially call up the contents from the
memo pads.
The 5 (or 10) most recently programmed frequen-
cies and operating modes can be recalled, starting
from the most recent.
• The memo pad capacity can be extended from 5 to
10 in the “Memopad Numbers” item in the Set mode.
(p. 87)
%1
MEMORY WRITE SWITCH [MW]
(p. 70)
Hold down for 1 second to store VFO data into the
selected memory channel.
• This can be done in both the VFO and memory modes.
%2
MEMORY CLEAR SWITCH [M-CLR]
(p. 71)
In the Memory mode, hold down for 1 second to
clear the memory channel.
• The channel becomes a blank channel.
•
This switch is disabled in the VFO mode.
%3
TUNING STEP SWITCH [TS]
(p. 27)
➥
Push to turn quick tuning step ON or OFF.
• When the “
” quick tuning icon is displayed above
the kHz digit, the frequency is changed in selected
quick tuning steps.
• When the quick tuning is OFF, the frequency is
changed in 10 Hz steps.
➥
When the quick tuning is ON, hold down for
1 second to display the “TS” screen (Tuning
Step) to select the quick tuning step.
• 0.1, 1, 5, 9, 10, 12.5, 20, and 25 kHz steps are inde
-
pendently selectable for each operating mode.
➥
When the quick tuning is OFF, hold down for
1 second to turn the minimum tuning step of
1 Hz ON or OFF.
■
Front panel (continued)
7
1
PANEL DESCRIPTION
$8 $9
%1
%3
%2
%0