![background image](http://html.mh-extra.com/html/icom/ic-7410/ic-7410_instruction-manual_612268086.webp)
79
SCANS
8
D
Memory scan
A Memory scan searches for signals through Memory
channels 1 to 99.
Blank (unprogrammed) channels are skipped.
NOTE:
To start a Memory scan, two or more Mem-
ory channels must be programmed. (p. 70)
q
Push [VFO/MEMO] to select the Memory mode.
w
Push [MENU] to display the “M2” screen (Menu 2).
e
Push [SCAN](F-1) to display the “SCAN” screen.
r
Rotate the [RF/SQL] control to set the squelch to
open or closed.
• The scan performance differs, depending on the squelch
setting when the scan was started. See page 76 for de-
tails.
• If the [RF/SQL] control function is set to “AUTO,” the
squelch is always open in the SSB, CW and RTTY
modes. (pp. 2, 32, 86)
t
Push [MEM](F-1) to start or cancel the Memory
scan.
• The MHz and kHz decimal points, and “MEMO SCAN”
blink while scanning.
• Rotating [DIAL] also cancels the scan.
■
Memory scan (Memory mode)
[SCAN]/[MEM]
[VFO/MEMO]
[MENU]
[RF/SQL]
While Memory scanning
M E M
∂
F
SPAN
S E T
S E L
SCAN
∂
F
:
±
1 0 k
M E M
∂
F
SPAN
S E T
S E L
SCAN
MEMO SCAN