![background image](http://html.mh-extra.com/html/icom/ic-706mkiig/ic-706mkiig_instruction-manual_612195044.webp)
41
5
MEMORY AND SCAN OPERATION
■
F
Frre
eq
qu
ue
en
nc
cy
y ttrra
an
ns
sffe
errrriin
ng
g
The frequency and operating mode can be trans-
ferred from memory mode to VFO mode.
➀
Select VFO mode with [
(F-3)
V/M
] in the
M2
dis-
play.
➁
Select a memory channel with [M-CH].
• Select memory mode to confirm the memory channel’s
contents, if desired; then return to VFO mode.
• “
}
” appears if the selected memory channel is a
blank channel (and does not have contents). In this
case transferring is not possible.
➂
Push [
(F-2)
MÜV
] for 2 sec. to transfer the frequen-
cy and operating mode.
• Transferred frequency and operating mode appear in
the display.
• “
MÜV
” does not appear in memory mode.
MÜV
F-2
SPLIT
Push for
2 sec.
[EXAMPLE]:
Transferring contents of memory 16.
Operating frequency:
21.320 MHz/USB (VFO)
Contents of memory 16: 14.020 MHz/CW
CH
VFO A
USB
CH
VFO A
USB
CH
VFO A
CW
M-CH
SHIFT
■
M
Me
em
mo
orry
y n
na
am
me
es
s
All memory channels (including scan edges and the
call channel) can be tagged with alphanumeric names
of up to 9 characters each.
All common keyboard characters (ASCII characters 33
to 126) can be used, including numerals and punctua-
tion marks.
•
C
Ca
alllliin
ng
g u
up
p m
me
em
mo
orry
y n
na
am
me
es
s
➀
Select the
G4
display.
➥
Push [DISPLAY] 1 or 2 times to select
G
.
➥
Push [MENU] one or more times to select the
G4
display.
➁
Select a memory channel with [M-CH].
•
E
Ed
diittiin
ng
g ((p
prro
og
grra
am
mm
miin
ng
g)) m
me
em
mo
orry
y n
na
am
me
es
s
➀
Call up the desired memory (channel) name as
above.
➁
Push [
(F-3)
É
] to enter memory name edit mode.
• “
name edit
” appears briefly, then a flashing cursor
appears under the first character position.
➂
Rotate the main dial to select the desired charac-
ter, then advance the cursor position.
• [
(F-3)
Ç
] increments the cursor position; [
(F-1)
Å
] decre-
ments the cursor position.
• [(F-2)] overwrites the character with a space.
➃
Repeat this procedure until all desired characters
have been selected.
➄
Push [
(MENU)
Ä
] to exit memory name edit mode.
• The
G4
display reappears and the programmed memo-
ry name is displayed.
G4 memory name
G4
G4 Repeater É
ÄÅÖ
name edit
É
F-3
Ç
F-3
Ç
F-3
Ä
MENU
ÄÅR
Ç
Ç
ÄÅRe
Ç
ÄÅRepeaterÖÇ
É
IC-706MKIIG.qxd 02.3.27 13:53 Page 41