![background image](http://html.mh-extra.com/html/icom/ic-706mkiig/ic-706mkiig_instruction-manual_612195037.webp)
34
4
RECEIVE AND TRANSMIT
D
C
CW
W p
piittc
ch
h c
co
on
nttrro
oll
The received CW audio pitch and monitored CW
audio pitch can be adjusted to suit your preferences
(300 to 900 Hz) without changing the operating fre-
quency.
➀
Push [MODE] one or more times to select CW
mode.
➁
Select
CW PITCH
in quick set mode.
• Push [DISP] for 2 sec. then push [MENU] one or more
times.
➂
Rotate the main dial to set the desired pitch.
➃
Push [DISPLAY] to exit quick set mode.
Q2 CW
PITCH
This shows the default
setting for the CW pitch
control (600 Hz).
CW
QUICK SET MODE
D
C
CW
W rre
ev
ve
errs
se
e m
mo
od
de
e
The CW
å
(CW Reverse) mode receives CW signals
with a reverse side CW carrier point like that of LSB
and USB modes. Use this mode when interference
signals are near the desired signal and you want to
change the interference tone.
➀
Push [MODE] one or more times to select CW
mode.
➁
Push and hold to toggle between CW and CW
å
modes.
• Check the interference tone.
• Receive audio tone response
(Reverse) CW
å
MODE
(Normal) CW
BFO
600 Hz
signal
inteference
signal
600 Hz
BFO
inteference
D
E
Elle
ec
cttrro
on
niic
c C
CW
W k
ke
ey
ye
err
The IC-706MKIIG has an electronic keyer. Both key-
ing speed and weight (the ratio of dot : space : dash)
can be set in quick set mode.
•
S
Se
ettttiin
ng
g tth
he
e e
elle
ec
cttrro
on
niic
c k
ke
ey
ye
err
➀
Select CW mode with [MODE].
➁
Push [DISPLAY] for 2 sec. to enter quick set mode.
➂
Push [MENU] one or more times to select item
Q4
CW PADDLE
, then rotate the main dial to select
the paddle type.
• When “ud” is selected, the up/down switches on the
microphone can be used as a paddle.
➃
Push [MENU] two more times to select item
Q6
RATIO
, then rotate the main dial to select the
desired weight.
• Key weight can be selected from 2.8 to 4.5.
• Check the selected ratio with the side tone function in
CW mode.
➄
Push [DISPLAY] momentarily to exit quick set mode.
P
Pa
ad
dd
dlle
e o
op
pe
erra
attiio
on
n ffrro
om
m ffrro
on
ntt p
pa
an
ne
ell M
MIIC
C c
co
on
nn
ne
ec
ctto
orr
Connect a CW paddle as at right to operate an elec-
tronic keyer from the front panel MIC connector.
• This function is available from the front panel mic
connector only.
• Be sure to select item “n,” “r,” “buG” or “oFF” in
Q4
CW PADDLE
in quick set mode. (p. 49)
• Connect straight key to “DOT” side.
KEYING WEIGHT EXAMPLE:
morse code “K”
*SPACE and DOT length can be adjusted with “
Q5 KEY
SPEED
” only.
DASH
Weight setting:
1:1:3 (default)
Weight setting:
Adjusted
DASH
DOT
(Fixed*)
Adjustable range
SPACE (Fixed*)
QUICK SET MODE
front panel
MIC connector
MIC U/D
CW
paddle
DOT
E
DASH
➁
➆
3.9 k
Ω
±
5%
2.2 k
Ω
±
5%
IC-706MKIIG.qxd 02.3.27 13:53 Page 34