![background image](http://html.mh-extra.com/html/icom/ic-41s/ic-41s_instruction-manual_612145041.webp)
37
9
SET MODE
9
D
Time-Out timer (TOT)
The Time-Out Timer (TOT) function limits continuous trans-
mission to prevent accidental prolonged transmission, etc.
This timer cuts a transmission OFF after 1 min. of continuous
transmission.
D
Lockout function
Select the transmission lockout (temporary transmission
inhibit) capability.
RP
(Repeater Lockout)
: Transmission is permitted only while
receiving a matched CTCSS tone, or
receiving no signal.
BU
(Busy Lockout)
: Transmission is inhibited while receiv-
ing a signal.
OF
(OFF)
: No restriction for receiving a signal.
D
Scan resume timer
The scan resume condition can be set as a pause (P5) or
timer scan (15/10/5). When a signal disappears, scan
resumes after 5 sec. has passed regardless of the setting.
15/10/5 : Scan pauses for 15, 10 or 5 sec. when a signal is
detected, then resumes after that.
P5
: Scan pauses until the signal disappears and then
resumes after 5 sec.
D
Scan restart function
This function starts the scan after the transmission is per-
formed during scan and 10 sec. has passed.
Scan restart timer
OFF (default)
Scan restart timer ON
Scan resume timer
P5 (default)
10 sec. setting
Lockout OFF (default)
Repeater lockout setting
TOT OFF (default)
TOT ON