15
3
BASIC OPERATION
3
■
Display backlighting
The transceiver has display backlight for night-time operation.
q
Push and hold
[Top]
(Set Mode)
for 2 sec. to enter set
mode.
w
Push
[Top]
* several times until “
LIGHT
” appears.
e
Push
[CH Up]
or
[CH Down]
to select the display back-
light condition.
•
ON
: Backlight lights continuously.
•
A2
: Lights for 5 sec. when any key except
[PTT]
is pushed, or
the LCD indication is changed.
•
AT
: Lights for 5 sec. when any key except
[PTT]
is pushed or
the Selcall signal is transmitted/received.
•
OF
: Backlight never lights.
r
Rotate
[VOL]
to turn the power OFF, or push and hold
[Top]
(Set Mode)
for 2 sec. to exit set mode.
*Regardless of the assigned key function.
■
Set mode
Set mode is accessed at power ON and allows you to set sel-
dom-changed settings. In this case you can “customize” the
transceiver operation to suit your preferences and operating
style. See p. 34 for set mode items detail.
Entering the set mode:
q
While pushing and holding
[CH Up]
and
[CH Down]
,
rotate
[VOL]
to turn the power ON. Then, push and hold
[Top]
(Set Mode)
for 2 sec. to enter set mode.
w
Push
[Top]
* several times to select the appropriate item.
Then push
[CH Up]
or
[CH Down]
to set the desired level/
condition.
• Available set mode functions are
SQL Level
,
CTCSS tone/
DTCS code
,
Auto power OFF
,
Backlight
,
Beep
,
Beep Level
,
Mic Gain
,
Battery Voltage
,
Signal Moni
,
Power Save
,
TOT
,
Lock-out
,
Scan Stop Timer
,
Scan Restart
,
Roger Beep
and
Own ID
.
e
Rotate
[VOL]
to turn the power OFF, or push and hold
[Top]
(Set Mode)
for 2 sec. to exit set mode.
NOTE:
Set mode can be accessed via the
[Top]
(Set Mode)
key operation only (p. 34.) In this case, set mode allows
quicker item selection. Set “Enable” to the most often used
items with the CS-41S
CLONING SOFTWARE
.
*Regardless of the assigned key function.
[
