![background image](http://html.mh-extra.com/html/icom/ic-41s/ic-41s_instruction-manual_612145023.webp)
19
5
SCAN OPERATION
5
D
Setting scan resume condition
q
Push and hold
[Top]
(Set Mode)
for 2 sec. to enter set
mode.
w
Push
[Top]
* several times until “
S-TIME
” appears.
e
Push
[CH Up]
or
[CH Down]
to select the scan resume
timer.
•
5
: Scan pauses for 5 sec. then resumes.
•
10
: Scan pauses for 10 sec. then resumes.
•
15
: Scan pauses for 15 sec. then resumes.
•
P5
: Scan pauses until the signal disappears, then
resumes 5 sec. after the signal disappears.
r
Rotate
[VOL]
to turn the power OFF, or push and hold
[Top]
(Set Mode)
for 2 sec. to exit set mode.
■
Open scan
Open scan searches for being transmitted signals automati-
cally and makes it easier to locate new stations for contact or
listening purposes.
IMPORTANT!:
Open scan can transmit on a start channel or busy chan-
nel.
q
Push
(Scan Mode)
several times to select the open
scan. (p. 18)
• “
” appears.
w
Push
(Scan)
to start the open scan.
t
When receiving a signal, scan pauses and resumes
according to the selected scan resume condition. (p. 19)
y
Push
(Scan)
to cancel the scan.
Scan start channel
Blinks
Open scan is selected.
Appears
[