![background image](http://html.mh-extra.com/html/icom/ic-41s/ic-41s_instruction-manual_612145014.webp)
■
Turning power ON
Prior to using the transceiver for the first time, the battery
pack must be fully charged for optimum life and operation.
(p. 39)
q
Rotate
[VOL]
to turn the power ON.
w
If the transceiver is programmed for a start up password,
input the digit codes as directed by your dealer.
• The keys in the table below can be used for password input:
• The transceiver detects numbers in the same block as identical.
Therefore “01234” and “56789” are the same.
e
When the “PASSWD” indication does not clear after
inputting 4 digits, the input code number may be incorrect.
Turn the power off and start over in this case.
D
Battery type selection
The battery type
MUST
be selected according to the type of
battery attached when turning the transceiver ON.
Ask your dealer for details.
NOTE:
When the selected battery type is not matched to
the attached battery, the transceiver does not work correctly.
q
Turn the power OFF in advance.
w
While pushing and holding
[Top]
and
[PTT]
, rotating
[VOL]
to turn power ON to toggle the attaching battery type.
• After the display appears, release
[Top]
and
[PTT]
.
• “DRY” is displayed for about 3 sec. then “
LOW
” appears when
the Alkaline battery operation is selected. In this case, the trans-
mit output power is low.
• “LI-ION” is displayed for about 3 sec. when the Lithium-ion bat-
tery operation is selected.
[VOL]
[PTT]
[Top]
Appears
Alkaline battery operation
(dry battery mode) is se-
lected.
KEY
NUMBER
0
5
4
9
3
8
2
7
1
6
[CH Down]
CH
Down
[VOL]
10
3
BASIC OPERATION