![background image](http://html.mh-extra.com/html/icom/ic-41s/ic-41s_instruction-manual_612145030.webp)
26
7
SELCALL OPERATION
r
Push
[PTT]
to transmit to the selected TX code channel,
or push
(TX Code CH)
to set the selected TX code
channel and return to the stand-by mode.
✔
CONVENIENT!
The TX code channel name can be assigned to the all 32 TX
code channel via the optional CS-41S
CLONING SOFTWARE
.
The TX code channel name allows you to easy to select the
channel, find the channel user, and so on.
D
TX code number edit
(TX Code CH)
enables you to change the TX code con-
tents within the allowable digits.
The group call function works by allowing you to edit a special
‘group code’ into the last 2 digits position of the SelCall ID
code.
To edit a TX code:
q
Select the desired CB channel (‘CB-XX’) except for chan-
nels 5 and 35. (p. 11)
w
Push
[Top]
(Function)
to enter the function mode, then push
(TX Code CH)
to enter the TX code channel selection
mode.
• Push
[CH Up]
or
[CH Down]
to select the desired TX code
channel, if desired.
e
Push and hold
(TX Code CH)
for 2 sec. again to enter
the TX code edit mode.
r
Push
(TX Code CH)
to select the desired digit to be
edited.
The editable digit starts blinking
Appears
Transmitting