![background image](http://html.mh-extra.com/html/icom/ic-208h/ic-208h_instruction-manual_611996064.webp)
49
9
DTMF MEMORY ENCODER
D
Programming a DTMF code— via microphone
z
Push [FUNC] then [
LOW
6(DTMF)] to turn the
DTMF encoder ON.
• “d” appears in place of 100 MHz digit.
x
Push [
SET
B(D-OFF)] to enter the DTMF memory
programming condition.
c
Push [
Y
] or [
Z
] to select the desired DTMF
memory channel.
v
Push the desired digit keys.
• When the first digit is input, previous memory con-
tents are cleared automatically.
• “E” stands for “
M
M
” and “F” stands for “# .”
• Push [
Y
]/[
Z
] and repeat this step if you make a mistake.
• The S/RF indicator shows the digit group. The indi-
cation increases every 6 digits.
b
Push [VFO/LOCK] to exit the programming condition.
• The [
CLR
A(MW)] key cannot be used to exit. If pushed, code “A”
is input. Reprogram in such a case.
DTMF
[EXAMPLE]:
Programming “5428AB453” into DTMF memory channel “D4.”
Push
Push
Push
Push
Push then .