![background image](http://html.mh-extra.com/html/icom/ic-208h/ic-208h_instruction-manual_611996011.webp)
VI
QUICK REFERENCE GUIDE
D
Antenna installation
•
Antenna location
To obtain maximum performance from the transceiver, select
a high-quality antenna and mount it in a good location. A non-
radial antenna should be used when using a magnetic mount.
•
Antenna connector
The antenna uses a PL-259 connector.
• PL-259 CONNECTOR
q
Slide the coupling ring
down. Strip the cable
jacket and soft solder.
w
Strip the cable as shown
at left. Soft solder the cen-
ter conductor.
e
Slide the connector body
on and solder it.
r
Screw the coupling ring
onto the connector body.
(10 mm
≈
3
⁄
8
in)
NOTE:
There are many publications covering proper an-
tennas and their installation. Check with your local dealer
for more information and recommendations.
30 mm
10 mm (soft solder)
10 mm
1–2 mm
solder solder
Soft
solder
Coupling ring
To antenna
Roof-mount antenna
(Drill a hole or use a magnetic mount.)
Gutter-mount antenna
Trunk-mount
antenna
Quick reference guide