37
5
MEMORY OPERATION
■
Transferring bank contents
[
Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION:
Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q
Select the desired bank contents to be transferred or
erased.
➥
Push [M/CALL•PRIO] several times to select memory
mode.
➥
Push [BAND] then rotate [DIAL] to select the desired
memory bank.
• Bank’s initial blinks.
➥
Push [BAND] to select the bank then rotate [DIAL] to se-
lect the desired contents.
• Bank’s initial stops blinking.
w
Push [SET•LOCK].
e
Push [SET•LOCK] or [S.MW•MW] several times until
“BAK” appears.
• The bank’s initial for the selected memory channel is displayed.
r
Rotate [DIAL] to select the desired bank initial to transfer
or erase.
• Select “-- --” indication when erasing the contents from the bank.
t
Push [V/MHz•PRIO] to set the bank and exit set mode.
y
Repeat steps
q
to
r
for transferring or erasing an an-
other banks contents.
z
Select the desired bank contents to be trans-
ferred or erased.
➥
Push [MR/CALL] to select memory mode.
➥
Push [FUNC], [
MONI
1(BANK)] then select
the desired memory bank via [
Y
]/[
Z
].
➥
Push [
CLR
A(MW)] to select the bank then
select the desired contents via [
Y
]/[
Z
].
x
Push [
SET
B(D-OFF)] to enter set mode.
c
Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] several
times until “BAK” appears.
v
Push [
Y
]/[
Z
] to select the desired bank initial to
transfer or erase.
• Select “-- --” indication when erasing the contents
from the bank.
b
Push [
CLR
A(MW)] to set the bank and exit set
mode.
n
Repeat steps
z
to
b
for transferring or eras-
ing an another banks contents.
BANK
[
Y
]/[
Z
]
SET
MAIN
T X
M
