![background image](http://html.mh-extra.com/html/icom/ic-208h/ic-208h_instruction-manual_611996043.webp)
28
5
MEMORY OPERATION
5
D
Programming a memory channel via the microphone
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.
Push 10 times
Beep
“
Beep
“
Beep
Beep
Beep
“
“
“
“
“
Push
Push then
Push then for 1 sec. and continue to push
➠
The microphone can also be used to program mem-
ory channels.
z
Set the desired frequency in VFO mode.
➥
Push [VFO/LOCK] to select VFO mode.
➥
Set the frequency using the keypad.
➥
Set other data
(e.g. offset frequency, duplex direction, sub-
audible tone encoder ON/OFF and its frequency)
, if neces-
sary.
x
Push [FUNC] then [
CLR
A(MW)] momentarily.
c
Push [
Y
] or [
Z
] to select the memory channel.
•
Direct numeral input cannot be used
.
v
Push [FUNC] then [
CLR
A(MW)] for 1 sec. to program.
➥
3 beeps may sound and the VFO contents (including
the subaudible tone frequency, etc.) are programmed.
➥
Memory channel number increases when continuing to
push [
CLR
A(MW)] after programming.
MW