background image

18

5

SCAN OPERATION

n

 Scan types

The IC-A14 has 3 scan types to suit your needs. IC-A14S 
has 2 scan types.

n

 COM band scan

q

  Push 

[CLR

] to select the frequency mode.

w

   Push 

[SQL

Y

]

/

[SQL

Z

]

 to set the squelch level to the 

point where noise is just muted.

For IC-A14

e

  Push 

[FUNC]

, then push 

[SCAN](2)

 to start the scan.

 

• When a signal is received, the scan pauses until it disappears.

 

• To change the scanning direction, push 

[

Y

]

/

[

Z

]

.

For IC-A14S

e

  Push and hold 

[

Y

]

/

[

Z

]

 for 1 sec. to start the scan.

 

• When a signal is received, the scan pauses until it disappears.

 

• To change the scanning direction, push 

[

Y

]

/

[

Z

]

.

To stop the scan, push 

[CLR]

.

WEATHER CHANNEL SCAN

Repeatedly scans all “TAG” weather channels. Weather 
channels are available for the IC-A14 only.

COM BAND SCAN

Repeatedly scans 
a l l   f r e q u e n c i e s 
o v e r   t h e   e n t i r e 
COM band.

108.00

MHz

Scan
Jump

118.00

MHz

136.975

MHz

MEMORY SCAN

Repeatedly  scans  se-
lected  memory  bank’s 
all “TAG” memory chan-
nels. Used for checking 
often-used channels and 
bypassing usually busy 
channels such as control-
tower frequencies.

non-TAG

channel

non-TAG channel

Mch 2

Mch 4

Mch 6

Mch 7

Mch 1

Mch 8

Mch 10

Mch 19

Decimal  point  blinks  during 
scan.

[FUNC]

[CLR]
[SCAN](2)

[

Y

]

[

Z

]

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

Summary of Contents for IA14













































Reviews: