3
1
PANEL DESCRIPTION
D
KEYPAD
(Available with IC-A14 only)
Inputs digit “1” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
Inputs “1,” “Q,” or “Z” during memory name pro-
gramming. (p. 15)
After pushing
[FUNC]
, turns the ANL (Automatic
Noise Limiter) function ON and OFF. (p. 22)
Inputs digit “2” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
Inputs “2,” “A,” “B,” or “C” during memory name
programming. (p. 15)
After pushing
[FUNC]
, starts the scan. (pgs. 18,
19)
Inputs digit “3” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
Inputs “3,” “D,” “E,” or “F” during memory name
programming. (p. 15)
After pushing
[FUNC]
, selects memory bank
mode, during memory mode. (p. 12)
Inputs digit “4” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
Inputs “4,” “G,” “H,” or “I” during memory name
programming. (p. 15)
After pushing
[FUNC]
, turns the weather alert
function ON and OFF. (p. 23)
Inputs digit “5” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
Inputs “5,” “J,” “K,” or “L” during memory name
programming. (p. 15)
After pushing
[FUNC]
, enters duplex transmit
frequency programming condition, during NAVI
band operation. (p. 24)
Inputs digit “6” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
Inputs “6,” “M,” “N,” or “O” during memory name
programming. (p. 15)
After pushing
[FUNC]
, selects duplex operation
during NAVI band operation. (p. 24)
Inputs digit “7” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
Inputs “7,” “P,” “R,” or “S” during memory name
programming. (p. 15)
After pushing
[FUNC]
, selects weather channel
mode. (p. 23)
Inputs digit “8” for frequency input or memory
channel selection, etc. (pgs. 8, 12)
Inputs “8,” “T,” “U,” or “V” during memory name
programming. (p. 15)
After pushing
[FUNC]
, key touch beep output ON
and OFF. (p. 22)
