25
6
OTHER FUNCTIONS
n
Set mode setting
Set mode is used for programming infrequently changed val-
ues or conditions of functions.
D
Entering set mode
q
Rotate
[VOL]
to turn the
transceiver power OFF.
w
While pushing and holding
[
Y
]
and
[
Z
]
, turn
[VOL]
to
enter set mode.
e
Push
[MR]
several times
to select the desired set
mode item.
r
Push
[
Y
]
/
[
Z
]
to select the
desired condition or value
for the item.
t
Push
[CLR]
to return to
frequency mode.
For IC-A14 only
Push
[FUNC]
then push and hold
[SET](ENT)
for 1 sec. to
also enters into set mode.
For your information:
The default value of the set mode items can be changed
with the optional cloning software, CS-A14. And the de-
fault settings are re-called by the home function.
D
Set mode items
• ANL— ANL function
(available with IC-A14S only)
Sets the ANL
(Automatic Noise Limiter)
function that reduces
noise components such as that caused by engine ignition
systems while receiving.
• BEEP— Key touch beep
(available with IC-A14S only)
The beep tone which sounds at the push of a switch can be
set, if desired.
• MIC— Microphone gain
The internal microphone gain can be selected to suits your
communicating style.
“H”
(High gain)
, “M”
(Middle gain)
and “L”
(Low gain)
selections
are available.
[VOL]
[MR]
[
Z
]
[CLR]
[
Y
]
