Icom AP-12, Instruction Manual

Page: 47 / 88

33
4
AP-12 MANAGER
4
Select the desired channel number for the wireless
communication.
(default: 11)
• The same channel number should be selected with
another AP-12 when Bridge mode A or C is selected.
• Wireless LAN clients will detect the channel of the
AP-12 automatically and select it by themselves in
Bridge mode B operation.
Enter the desired ID for wireless network groups.
Up to 32 alphanumeric characters (case sensitive) can
be entered (default: LG).
• The ID entering is not possible when Bridge mode A
or C is selected in
o
Functional mode.
Select the packet size for negotiation of data trans-
mission from 500 bytes, 1000 bytes and Off. When the
transmission packet size exceeds the selected value,
Rts (Request to send) and Cts (Clear to send) data is
transmitted to prevent communication speed deterio-
ration from the “Hidden wireless client” access.
See p. 35 for “Hidden wireless terminals”.
Select the packet size for the fragmentation operation.
(default:OFF)
This setting improves total data transmission speed by
sending fragmented data, not all, when the communi-
cation is disconnected, such as that caused by inter-
ference.
Select the data transmission speed from 11 Mbps
(fixed) and automatic.
(default:11 Mbps/fixed)
When automatic is selected (“
✓
” mark appears), the
data transmission speed is selected from 11, 5.5, 2
and 1 Mbps automatically according to the conditions.
r
Channel ……………
t
ESS ID ……………
y
RTS Threshold ……
u
Fragmentation
Threshold …………
i
Rate ………………
AP-12_USA 02.7.26 9:32 AM Page 33 (1,1)