iColor 700, User Manual

Page: 111 / 121

111
STEP 9 of 17 STEP 10 of 17
Press release lever (g) and pull trapped paper from
the fuser. Replace fuser unit into the machine and move locking
levers (e) toward the rear of the machine.
STEP 11 of 17 STEP 12 of 17
Starting with the cyan image drum unit nearest the
fuser, replace the four image drums into the drum
cavity, making sure to place in the correct order. Open the rear exit tray (h) and check for sheets of
paper in the rear path area (i), pull out any sheets
found in this area.
STEP 13 of 17 STEP 14 of 17
If the sheet is low down in this area and difficult to
remove, it is probably still gripped by the fuser. In
this case raise the top cover, reach around and
press down on the fuser pressure release lever (d).
Pull down the MP tray using the depressions. Lift the
front cover release lever and lower the front cover.