23
UniNet
3232 W. El Segundo Blvd., Hawthorne, California 90250 | [email protected]
www.icolorprint.com
Setting the Multipurpose tray to work with
specific sized papers
iColor® transfer papers come in a variety of sizes, so it is recommended that you set the MPT tray to the size
of the paper that you most commonly use. If the MPT tray identifies a paper that is not within its set
parameters, the iColor® 500 printer will prompt you to press the online button after each print. Adjusting the
settings will avoid this for the specific size you set.
The following instructions are for printers that have been set up within a network, using an IP address. Use
your web browser to change the default settings:
1)
From your web browser, go to 192.168.X.X (the specific IP address assigned to your printer)
2)
Navigate to the admin menu and enter the username (root) and password (aaaaaa) (six lowercase
letter a’s)
3)
Change all settings to match the following for Printer > Print Setup > Print Method:
