19
UniNet
3232 W. El Segundo Blvd., Hawthorne, California 90250 | [email protected]
www.icolorprint.com
iColor
®
500 printer settings for iColor
®
Premium Transfer Media without the iColor
®
TransferRIP Software
These instructions are only when NOT using the iColor® TransferRIP software. When using the RIP, all settings
are adjusted within the software itself and overrides all other settings. The following is shown using the
PostScript or
PS driver
. The choices are the same for the
PCL driver
but the dialog boxes are different.
These can be set as
Printer Preferences
from Devices and Printers or as
Document Properties
when printing.
Setting them as Printer Preferences means they will be the same the next time you use the printer.
1.
Under the Paper/Quality tab, set the paper source to the
Multi‐purpose Tray
.
