17
UniNet
3232 W. El Segundo Blvd., Hawthorne, California 90250 | [email protected]
www.icolorprint.com
Printing with Fluorescent Colors
To convert your printer to fluorescent colors, swap out the cyan, magenta and yellow STD color cartridges
with your fluorescent colors. If operating in “B” configuration, insert the cyan fluorescent in the first slot. The
magenta and yellow go in their normal slots. The white toner is already fluorescent and just stays in place.
Fluorescent toners, by their nature, are very bright and cannot create accurate composite black. Be sure to use
images that have bright colors and avoid dark or black colors for best results.
Most fluorescent images will be placed on a black or dark colored garment, so black would not be suggested in
these cases anyway.
Ask your dealer about upgrading to security and clear toner options as well!
Use Geniune UniNet iColor
®
Consumables
Only use genuine UniNet iColor® consumables. The use of incompatible supplies (toner, drums, transfer belts,
fusers) will cause damage to your printer not covered by your warranty.
