N I - 7 0 7 5 2 5 H O M E P L U G A D A P T E R S TA R T E R K I T 2 0 0 M B P S
3
3.2 Buttons
Figure 3-1 Side panel
RST: Restore the factory defaults.
NMK: Set the membership state.
Pressing and holding the NMK button for more than 10 seconds
randomizes the NMK value.
Pressing and holding the NMK button for more than 3.0 seconds
makes the adapter a member of the existing AVLN.
3.3 LEDs
There are 3 LEDs on the front panel to indicate the status of the adapter.
Power: Green. It is on when the adapter is powered on.
Ethernet: Green. It blinks to indicate activity over the Ethernet connection.
Data: Green. It blinks to indicate activity over the Homeplug connection.
Summary of Contents for 200 MBPS
Page 1: ......
