N I - 7 0 7 5 2 5 H O M E P L U G A D A P T E R S TA R T E R K I T 2 0 0 M B P S
15
Preferences
The lower part of the panel displays options for turning the autoscan function on or off.
6
N M K P U S H B U T T O N U S A G E
This section describes how to add new devices or remove old devices from a HomePlug AV
logical network (AVLN) by using a NMK pushbutton.
Power LED status indicates the operation progress and result.
6.1
Forming a HomePlug AV Logical Network
When two devices with different NMK values are connected to the same Homeplug, and the
user wants them to form a logical network.
1.
Press the NMK button on device A for less than 3 seconds.
2.
Press the NMK button on device B for less than 3 seconds. The button
on B must be pressed within 1 minute
3.
Wait for the connection to complete.
The Power LED on both devices blinks evenly at 1-second intervals until the operation
succeeds or fails. If the connection succeeds, it illuminates steadily. If an error occurs, the
Power LED on the ‘adder’ blinks unevenly until the pushbutton on the ‘adder’ is pressed
again or the ‘joiner’ is reset by holding the pushbuttons down for more than 10 seconds.
Summary of Contents for 200 MBPS
Page 1: ......
