5. Drain Pump Model
1) Position the ice maker at the front of the opening of
installation location.
2) Install the water inlet line (1/4" diameter copper pipe) and
connect the water supply valve.
3) Connect the drain line from the ice maker to the drainpipe.
Important Information: An air gap may be required between the
drain line and the drainpipe, under the provision of local laws
and regulations. Refer to the drawing below.
5) If the electric outlet is at the back of the product, insert the
provided plug into the electric outlet.
6) Install the product so that the front of the product is facing
forwards.
7) Connect the water inlet line to the water-supply.
8) Connect the 5/8” drain hose to the drainpipe at the back of
the product using a hose clamp. If required, immerse the drain
hose in warm water before connecting it to the fitting.
9) Turn on the water supply and check for leaks.
10) Pour 3 quarters of the water into the ice bin. The drain
pump should activate and pump the water upwards. Check the
drain pump for popper operation and leaks.
11) Turn the switch to the “ICE" position. The compressor
starts working 3-5 minutes.
12) Pour 3 quarters of water into the ice bin and block the
drain tube while the drain pump is operating. At this time,
check whether the operation has stopped.
15) Adjust the leveling legs.
Important Information: Plumbing should be carried out in
accordance with all the provisions laid out under local laws
and regulations.
9
Drain pump kit (Optional)
You may order the ice maker with or
without a drain pump. In the case of the
model with no drain pump, water is drained
by gravity.
However, it is possible to install a drain
pump kit on the gravity drainpipe model if
you wish convert the model to a drain pump
model.
You may obtain the necessary parts for
conversion from your local distributor.
A detailed description of installation is
included in the kit.
Fig. 8
Front View
Fig. 7 Top
View
S hut- O ff V alve
W ater Filter
W ater Inlet Tub e
D rain Tub e
A ir G ap D evice
2
4
"(
6
1
0
)
M IN . 15"(381)
0.16(4)
0.16(4)
M
IN
.
3
4
"(
8
6
3
.6
)
