17
Cleaning outside
If the surface of the door and lever become stained, scrub
them at once. If the door and/or gasket have spots on the
surface, remove the spots using soap and warm water. Use
non-abrasive cloths or pads. In the case of the stainless
steel exterior, use a soft and non-abrasive stainless steel
washing agent and use a soft lint free cloth.
When performing maintenance work or cleaning, turn off
the switch or circuit breaker of the ice maker.
Cleaning the ice bin
The ice bin should also be cleaned regularly.
1 ounce of home bleaching agent and 2 gallons of warm
water at 95℉
-
115℉ (35
-
45℃) are mixed for use as a
cleaning solution. Moisten clean cloths with the cleaning
solution and scrub the inside of the ice bin with the
cloth. Pour a small quantity of the solution into the drain
Pipe, then dry the interior.
Cleaning condenser
The condenser should be cleaned 2-3 times a year to
remove any lint that has penetrated the condenser. When
cleaning the condenser, remove the front lower panel and
the kick plate/grill using a screwdriver. Then, remove any
dust and lint from the condenser using a soft bristle brush.
For the position of the condenser, refer to the drawing.
Important Information: To avoid possible bending of the
condenser fins, clean the condenser in the direction of the
fins (up and down).
If the condenser is not cleaned, the temperature may rise
or the machine may experience technical problems or
sustain damage.
CAUTION
!
CAUTION
!