27
ICETRO’ AIR PUMP
A
Pump
Cleaning
<
ICETRO
pump allows, by changing position of regulator pos
ition
.
A
, to vary proportions between air and mix conveyed to the
freezing cylinder ; so, within certain limits, it allows overrun
regulation depending on mix used.
<
ICETRO
pump regulator should be set to the middle position.
If, after dispensing a significant number of cones, ice cream is
too heavy and wet, you may move
ICETRO
pump
regulator a notch at a time towards the right. If ice cream comes
out of spigot mixed with air bubbles, then turn pump regulator a
notch at a time towards the left.
Disassembling the pump
- Disconnect the connection pipe by free
ing
it from the pin found on the pump cover.
- Pull the connection pipe backwards and remove the feeding pipe(
7 >
) then pulling upwards.
- Removing the pump by turning it clockwise of 45
"
then pull backwards.
- Disassemble the pump
