22
Wash mode
1. Press the wash button on the control panel.
(Wait until the soft cream in the cylinder is
melted. About 10 minutes.)
4. Clean out the raw materials and foreign objects
from around the agitation axle, level sensor,
drain hole, and so forth from inside
the Mixing tank with a brush.
3. Remove the soft cream liquid in the mixing
tank and pour faucet water into it.
Repeat it two or three times until you get clean
water from it.
Level sensor
2. Take out the caburator (tube+body).
Tube
Body
5. Press the wash button and finally discharge
the water from the mixing tank. Use faucet
water to rinse off the cleaning agent residuals.
6. Stop the product by pressing wash button (do
not turn off the power switch) and loose the
dasher cover bolts diagonally by the order
shown in the picture and separate the dasher
cover from the machine.
(303)
(203)
Cleaning method
Level sensor
(203SN,SNP)
