16
Explanation of the function button (set by an expert)
2: Operation time setting after sales
Set the operation delay time of the air pump sales. After the motor
operation is stopped, the air pump is additionally operated
according to the time set for this category.
3: Operation time set after button input
Set the time that the air pump operates every time the button is
pushed.
4-18: Select the use of pasteurization.
4-19: Button lock function setting
By activating this category, the buttons (refers to the work mode
buttons on the right such as auto, wash, heating, stand-by, refresh,
refrigeration, and so forth) can be locked. Press both the "-" button
and the "+" button for 5 seconds, in order to lock the buttons and do
the same in order to unlock the buttons.
4-20: Voltage corresponding current compensation setting
This is the function for compensating the current value when the
voltage is easily changed during the making of soft freezer.
This product consumes a lot of power. Therefore, install and make
sure it has a supply of enough stable power.
4-21: Dasher motor delay time setting
Sets the motor
s operation delay time after making soft freezer.
4-22: Compressor delay time setting
This sets the compressor
s operation delay time after making soft
freezer. If this category is given much time, soft freezer can be frozen
too much and problems can occur to the product.
4-25: Operation temperature selection
This detects the temperature at the time set in Category 4-24 and
sets the temperature at which the compressor can be operated.
The compressor is operated for duration stipulated in Item 4-23
when the temperature reaches the temperature that was set for this
category
4-23: Selection of the compressor forced operation
This is the function for forcibly operating the compressor during rest
time when the compressor is not operating. The following categories
appear when the compressor operation time is set in this category.
4-24: Temperature detection time setting after stop
This chooses the time to determine the temperature during the
rest time. In case "4n" is chosen, it means, "detecting temperature
4 minutes after rest." It sets the temperature for operating the
compressor.
