icetro ISI-163SB, User Manual, Page: 13 / 32

13
Cleaning method
■ Wash mode ■
1. Press the wash button on the control panel.
(Wait until the soft cream in the cylinder is melted,
About 10 minutes.)
2. Remove the cover food pan and
Take out the carburetor (tube+body)
Please do not let water or ice cream mix get
into the agitator shaft.
3. Remove the soft ice cream liquid in the mixing
tank and pour faucet water into it.
Repeat it two or three times until you get clean
water from it.
5. Press the 'WASH' button and finally discharge
the water from the mixing tank.
Use fauce twater to rinse off the cleaning
agent residuals.
6. Press the wash button to stop the product
and Release the four dasher cover bolts.
(do not turn off the power switch)
4. Clean out the raw materials and foreign
objects from around the level sensor,
drain hole, and so forth from inside the
Mixing tank with a brush.
(The location of the level sensor may be different
depending on model types.)
level sensor
carburetor
impeller