background image

4

ICE i28BT / i32BT

OPERATOR MANUAL

Safety pRecautIonS

This machine is intended for commercial use. It 

is designed exclusively to scrub hard floors in an 

indoor environment and is not constructed for any 

other use. Only use recommended accessories.

all operators shall read, understand and 

exercise the following safety precautions: 

1. Do not operate machine:

 

-

Unless trained and authorized.

 

-

Unless you have read and understand the 

operators manual.

 

-

In flammable or explosive areas.

 

-

If not in proper operating condition.

 

-

In outdoors areas.

2. Before starting machine:

 

-

Make sure all safety devices are in place  

     and operate properly. 

3. When using machine:

 

-

Go slow on inclines and slippery  

     surfaces. 

 

-

Follow all safety guidelines.

 

-

Be very careful when using the machine in 

reverse.

 

-

Reduce speed when turning.

 

-

Report and fix any damage to machine prior 

to operating it.

 

-

Never allow children to play on or  

     around.

 

-

Do not operate on inclines that exceed 5%  

     (3°).

4. Before leaving or servicing machine:

 

-

Stop on level surface.

 

-

Turn off machine.

5. When servicing machine:

 

-

Read operators manual thoroughly prior to 

operating or servicing this machine.

 

-

Use manufacturer supplied or approved 

replacement parts.

 

-

Secure machine with wheel blocks prior to 

jacking the machine up.

 

-

Use approved jack or hoist to safely elevate 

the machine.

 

-

Disconnect batteries prior to working on 

machine.

 

-

Wear gloves when handling batteries or 

battery cables. 

 

-

Avoid any contact with battery acid

 

-

Avoid moving parts. Do not wear loose fitting 

clothing while servicing machine.

     

WaRnInG: Batteries emit hydrogen 

gas. Explosion or fire can result from 

hydrogen gas. Keep sparks and open 

flames away! Keep battery compartment 

open when charging.

     

WARNING: Flammable materials can 

cause an explosion or fire. Do not use 

flammable materials in tanks.

     

WARNING: Flammable materials or 

reactive metals can cause explosion or fire. 

do not pick up.

Summary of Contents for i28BT







































Reviews: