Ice Bear® 30 Unit Ratings by Ton-hour
Ice Bear
®
30 Unit Features
The Ice Bear 30 unit is a highly flexible TES system which can be installed “out-of-the box” in a wide
variety of configurations and environmental settings.
•
Storage capacity: 30 ton-hours at a peak capacity of 5 tons
•
Remotely programmable Ice Make/Ice Cooling schedules
•
Remote monitoring of operation and equipment performance
•
Instantaneous output capacity unaffected by ambient temperature
•
Versatile staging
o
Offloading a single stage of a two-stage Ice-Ready™ rooftop unit
•
Rooftop or ground mounting options
•
Maximum refrigerant line length: up to 150 feet between Ice Bear 30 and rooftop unit
•
Maximum vertical lift: up to 35 feet above the Ice Bear 30 unit.
•
Electrical consumption:
o
On-peak Ice Cooling: 300 watts (nominal)
o
Off-peak Ice Make: 3,470 watts (typical at 75 °F)
•
Three models:
o
IB30A-521—208/230V, 1 phase
o
IB30A-523—208/230V, 3 phase
o
IB30A-543—460V, 3 phase
Approvals and Code Compliance
Ice Energy has contracted with Intertek’s ETL SEMKO division to provide independent
confirmation of the capabilities of the Ice Bear 30 Unit.
See
Ice Bear® 30 Unit ETL Certified
Performance Data
later in this manual.
The Ice Bear 30 unit has been approved for use as a Title 24 Compliance Option in the state of California.
Refer to
Appendix D – Title 24 Building Energy Standards Models
for more information.
4 Ice
Bear
®
30 Unit Application Guide