9
ICCONS
®
GAS TOOL GT-6 & GT-6ST USER MANUAL
March 2017 revision 1
4.9 Adjust The Driving Depth
Caution !
•
Please READ and UNDERSTAND the section 1
“General Safety Instructions” for personal and
working environment safety.
•
Never press the pin guide by bare hand or by
any parts of the body.
•
Never point the tools at anybody.
•
Only pull the pin guide to separate the pin lock
Steps:
1. Remove the pins, fuel cell and battery
attached on the tool.
2. Adjust the knob clockwise to increase the
driving depth, or vice versa.
4.10 Cleaning Filter
The filter at the back of the tool acts crucially to
suck in air into the chamber. For maintaining the best
performance of the tool users should always keep it clean.
1. Unscrew the socket screw on the filter.
2. Take out the filter and clean the mesh with
brush or air.
3. Put the filter on the machine and fasten with
the socket screw.
NOTE:
•
Do not attempt to use water to clean the
mesh. The cover and mesh must be dry when
operating the tool. If wet it may easily cause
malfunction to the tool.
4.11 Regular Maintenance
ICCONS® GT6 tool allows user to perform regular
maintenance easily. It helps maximizing the
performance and durability of the tool.
1. Unscrew 4 socket screws and remove the head
cover.
2. Pivoting the cylinder head.
3. Now you can perform cleaning for crucial parts
including spark, fan blade, cylinder with de-
carbonizer spray.
4. Wipe them clean completely, lubricate and
reassemble.
