iCanView110/110W User’s Guide
Rev.1.4 (Jan. 2005)
9 of 56
y
Microphone :
Picks-up sound from the environment for transmission over the network..
y
Mount Ring :
Used for attaching lens unit to iCanView110.
2.3.2. Rear panel
Figure 2-2. Rear Panel of iCanView110/110W
y
MIC /LINE IN :
It is used to connect external audio source or microphone to iCanView110. If
external audio is connected, embedded microphone will be disabled.
y
LINE OUT
: It is used for connecting external speakers with built in amplifier. Audio from
remote site is output through Line out in bi-directional audio mode.
Use Standard stereo earphone jack for the connection.
y
10Base-T
: 10Mbps Ethernet connector (RJ-45).
y
LINK LED :
Green light means that network cable is in normal condition.
y
LAN LED
: When there is traffic on the LAN, yellow light flickers.
