iCanView110/110W User’s Guide
Rev.1.4 (Jan. 2005)
15 of 56
3. Connecting the iCanView110
iCanView110 supports LAN, xDSL, and Cable modem. It also support shared IP network where
single IP is shared by many devices using IP sharing device. Refer to
[IP-Installer User’s
Guide]
for details of setting the IP address for the iCanView110 by using the “IP-Installer”.
3.1. Connecting to LAN
In case of connecting the iCanView110 to LAN, it is generally connected as follows
{Figure 3-
1.}
Figure 3-1. Connecting the iCanView110 to LAN
1. After applying the power, connect the LAN cable and assign an IP address to iCanView110 by
using the IP-Installer.
2. To assign an IP address to the iCanView110, run the IP-Installer in the PC connected in the same
subnet as iCanView110 is connected.
3. Check if you can receive video data when connecting to iCanView110 using the viewer program.
②
