iCanServer540R User’s Guide
iCanServer540R does not function properly if there is no video and audio input.
Refer to the following table. You have to connect at least one Video In.
Connectors
Function
Signal description
Number
Video In
Input video
connector
Analog video outputs from analog
CCTV camera, DVD, TV etc.,
(NTSC/PAL/SECAM)
1 to 4
Line In/Mic
Audio in
Microphone or output from audio
devices.
1 to 4
Line Out
Audio out for
speaker
When in bi-directional audio mode,
Audio signal from remote site is
available from this connector. Use
speaker with amplifier.
1
Alarm IN
Connecting
Alarm Sensor
IR sensor, Motion Sensor, Smoke
Detector…
1 to 4
RLY Output
Connecting
Alarm alerting
device
Siren, Flashing Light…
1 to 2
RS485
PTZ device
control
Output signal controlling PTZ device
5. Video connection to iCanServer540R
You can connect to iCanServer540R in video mode by running “
iNVR
” program on your PC.
Detailed information of using “
iNVR
” can be found in [
iNVR User’s Guide
].
You also can connect to iCanServer540R for video and audio streaming via a conventional web
browser such as Internet Explorer by typing the IP address assigned to iCanServer540R into the
browser.
Rev.1.0 (Nov. 2006)
13
