iCanServer540R User’s Guide
Click on SAVE to save the ID.
PTZ Operation
Check
PAN Step
Adjust the panning step.
TILT Step
Adjust the tilting step.
ZOOM Step
Adjust the zooming step.
Left/Right/Up/Down
ZIN/Auto
Focus/ZOUT
You can check various operations of the PTZ devices.
“Left”/”Right”/”UP”/”DOWN/Zoom In/Zoom Out/Auto
Focus”
PTZ Position
Setup
You can set up the PTZ limitation & preset positions if the
PT device supports it.
Panning Limitation
Set the left/right limitation and test.
Select Left/Right position before setting.
Panning Limitation
RESET
Clear the panning limitation previously set.
The panning range will be the same as the PT device
allows.
Panning Limitation
SET
Set the present position as left or right panning limitation.
Panning Limitation
TEST
Test the panning limitation which was set previously.
Preset Position :
Set the preset position and test.
Preset Position
Preset & Move
Select a preset position to move to. Movement to the
preset position will be made upon clicking on “MOVE”
Preset Position
Name Set
Assign logical name for the preset position. Enter into the
field and click on SET.
Preset Position
Set
Set the present position as a preset position with position
number shown at the right of “Preset & Move” and name
shown at the right of “Name Set”.
Rev.1.0 (Nov. 2006)
36
