15
End of the cycle
Once the cycle is completed,
“End” will appear at the end of the graphic,
the printer will print out and the digital report saved in the USB memory is
these are connected.
Caution:
Always use the tray handle to load or unload the tray
into the sterilizer. Failure to do so can result in burning.
Manually interruption of the cycle
To interrupt a started cycle prematurely, hold
for 3 seconds.
If the cycle is manually interrupted after it reaches the drying phase, the items inside the sterilizer
may be considered sterile and considering that the cycle has been interrupted during the drying
phase the materials and instruments inside the chamber may be wet.
Note: If the cycle is manually interrupted before it reaches the drying phase, the items inside the
sterilizer must be considered not sterile. N20 will appear on the screen. (see
Error code
description).
Caution: Depending on the phase of the cycle, steam and water can escape from the
sterilization chamber when you open the door.
If the cycle is manually interrupted after it reaches the drying phase, the items inside the sterilizer
may be considered sterile.
Note: Considering that the cycle has been interrupted during the drying phase the materials and
instruments inside the chamber may be wet.
If the cycle is manually interrupted before it reaches the drying phase, the items inside the
sterilizer must be considered not sterile.
Caution: Depending on the phase of the cycle, steam and water can escape from the
sterilization chamber when you open the door.
Delay start cycle
