manualshive.com logo in svg

IC Bus BE Series, Operation And Maintenance Manual

The Modena BE Series user manual is a comprehensive guide that enables users to effortlessly install, navigate, and maintain their Modena BE products. This essential manual can be easily accessed and downloaded for free from our website, ensuring a hassle-free user experience.

Share
Download
background image

Index

I

(CONT.)

Indiana Mills and Manufacturing Inc. (IMMI

®

) Integrated Child

Restraint Seats (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Inspection Check Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Brakes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Emergency Exits and Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Exterior Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Front Suspension. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Integrated Air Conditioning System (IC Air). . . . . . . . . . . . . . . . . .20
Interior Visual and Operational Checks. . . . . . . . . . . . . . . . . . . . . . .18
Propane Autogas System Inspection. . . . . . . . . . . . . . . . . . . . . . . . .22
Underhood and Fluid Checks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Inspection of Seat Belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188
Installing Tether. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113
Instrument Panel Gauge Audible Alarms. . . . . . . . . . . . . . . . . . . . . . . .45

Audible Alarms Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Instrument Panel Gauge Cluster. . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 26

Direct Drive Warning Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Instrument Panel Gauge Audible Alarms. . . . . . . . . . . . . . . . . . . . .45
Instrument Panel Gauge Cluster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Integral Digital Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Integral Digital Display Detailed Information. . . . . . . . . . . . . . . . . .30
Optional Instrument Panel Gauge Cluster Compass

Calibration Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Compass Declination Zone Set Procedure. . . . . . . . . . . . . . . .39
Compass Directional Calibration Procedure. . . . . . . . . . . . . . .42

Outside Temperature and Compass Displays (Optional). . .37
Outside Temperature Reading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
User Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

I

(CONT.)

Instrument Panel Gauge Cluster (cont.)

Warning Indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Integral Digital Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Integral Digital Display Detailed Information. . . . . . . . . . . . . . . . . . . .30

Quadrant 1: Informational Displays. . . . . . . . . . . . . . . . . . . . . . . . . . .30
Quadrant 2 Text and Warning Messages. . . . . . . . . . . . . . . . . . . . .32
Warning Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Integrated Air Conditioning (IC Air) System. . . . . . . . . . . . . . . . . . .175
Integrated Air Conditioning System (IC Air). . . . . . . . . . . . . . .20, 104

Integrated Air Conditioning System (IC Air) Table. . . . . . . . . . .20

Integrated Air Conditioning System (IC Air) Table. . . . . . . . . . . . . .20
Integrated Child Restraint Seats (Optional). . . . . . . . . . . . . . . . . . . . .88

Indiana Mills and Manufacturing Inc. (IMMI

®

) Integrated Child

Restraint Seats (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

Flooring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Interior Light Bar Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Upholstery Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150

Interior (Dome) Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Interior Light Bar Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Interior Visual and Operational Checks. . . . . . . . . . . . . . . . . . . . . . . . . .18

Interior Visual and Operational Checks Table. . . . . . . . . . . . . . . .18

Interior Visual and Operational Checks Table. . . . . . . . . . . . . . . . . . .18
International

®

Ride Optimized Suspension (IROS) (If

Equipped). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

1/4 Turn Fuel Safety Shutoff Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . .12
1/4 Turn Fuel Safety Shutoff Valve Location. . . . . . . . . . . . . . . . .12
CE Bus Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
CE Bus Left View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
CE Bus Rear View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

221

Summary of Contents for BE Series
















































































































































































































































Reviews:

No comments

Related manuals for BE Series

PREVOST H3-45 VIP Owner'S Manual preview
H3-45 VIP
Brand: PREVOST Pages: 98
PREVOST X3-45 COMMUTER 2018 Operator'S Manual preview
X3-45 COMMUTER 2018
Brand: PREVOST Pages: 172
PREVOST X3-45 VIP 2015 Owner'S Manual preview
X3-45 VIP 2015
Brand: PREVOST Pages: 190
PREVOST X3-45 VIP 2017 Owner'S Manual preview
X3-45 VIP 2017
Brand: PREVOST Pages: 212
PREVOST X3-45 2011 Operator'S Manual preview
X3-45 2011
Brand: PREVOST Pages: 214
PREVOST X3 Commuter Operating Manual preview
X3 Commuter
Brand: PREVOST Pages: 228
PREVOST X3-45 2017 Operator'S Manual preview
X3-45 2017
Brand: PREVOST Pages: 227
PREVOST X3-45 2016 Maintenance Manual preview
X3-45 2016
Brand: PREVOST Pages: 459
PREVOST X3-45 COMMUTER Maintenance Manual preview
X3-45 COMMUTER
Brand: PREVOST Pages: 549
PREVOST LE MIRAGE XLII BUS SHELLS Maintenance Manual preview
LE MIRAGE XLII BUS SHELLS
Brand: PREVOST Pages: 1260

Brands by name

Popular brands

Load more brands