IC Bus BE Series, Operation And Maintenance Manual

Page: 38 / 239

Instrumentation
20 Illuminates when the AMBER warning
flasher lights are activated.
21 Illuminates YELLOW when an antilock
brake system malfunction has been
detected. If the ABS indicator stays
illuminated or continues to flash, have
the system serviced immediately.
22 Illuminates YELLOW when transmission
Economy Mode is selected. Refer to the
Transmission Operator Manual for more
information.(If Equipped)
23 Flashes GREEN when the left turn signal
or the hazard lights are turned on.
24 Illuminates BLUE when the high beam
head lamps are turned on.
25 Flashes GREEN when the right turn
signal or the hazard lights are turned on.
NOTE: If the MIL is illuminated, it is the vehicle owner's
responsibility to have the engine repaired or face fines.
Instrument Panel Gauge Cluster
WARNING
To prevent property damage, personal injury,
and / or death, never operate the vehicle when
insufficient air pressure (less than 70 psi [483
kPa]) is indicated for either the primary or
secondary air system. The volume of air required
to stop the vehicle may be greater than that
available. Have the brake system checked and
repaired before returning the vehicle to service.
There are 10 gauges in the instrument panel gauge cluster to
help monitor the vehicle while in service. Most gauges have
in-gauge warning indicators that turn on if the gauge pointer
moves into an out-of-acceptable-range condition.
When the
ignition switch is turned on, the gauge indicators will be on.
Metric versions of the gauges and speedometer are available
as an option.
NOTE: If any indicator fails to go out after starting engine,
stop engine and determine cause of the gauge indication
that is out of acceptable range.
26 Not used
27 Indicates engine oil pressure in pounds
per square inch (PSI).
26