Instrumentation
28
Indicates the transmission lubricant
temperature in degrees Fahrenheit (°F).
29
Indicates engine coolant temperature in
degrees Fahrenheit (°F).
30
The tachometer indicates engine speed
(rpm). The engine can be operated
between idle speed and high idle speed
without damage but should not be
allowed to over-speed (such as when
going downhill).
31
The speedometer indicates the vehicle
speed in miles per hour (mph) and
kilometers per hour (km/h).
32
Indicates the battery voltage (VOLTS)
when the ignition switch is in the ON
position.
33
Provides indication of air pressure
available for the primary air brakes in
pounds per square inch (PSI).
34
Indicates the approximate fuel level in
the fuel tanks.
35
Provides indication of air pressure
available for the secondary air brakes in
pounds per square inch (PSI).
Direct Drive Warning Indicators
The Instrument Panel Gauge Cluster also houses eight (8)
direct drive warning indicators that alert the operator of various
conditions of the vehicle. They are in two groups of four each,
located on both sides of the LED quadrant displays.
The
warning indicators that are not used in this particular model will
be
substituted with
a blank cover plate.
NOTE: There are several variation of Direct Drive Warning
Indicators. Actual indicator configuration may vary.
27
Summary of Contents for BE Series
