Manual de Operação - SONOPEEL
1
a
edição (10/2009)
38
Press the NEXT key until the cursor
in field Timer starts “flashing”.
Through the SET+/SET- key, select 15 minutes. At this moment the liquid crystal
display is shown as indicated in figure 19.
Figure 19.
Liquid crystal display and selection of the treatment time, programmed
time of 15 minutes.
Now press the START key to start and execute the selected programming.
Note that the “flashing” cursor disappears. Now, through UP/DOWN-PEELING
INTENSITY keys, select the intensity (Low, Medium or High) necessary to the
application.
RECOMMENDATIONS
We suggest that the procedures to prepare the patient and to place the electrodes
are made before turning on and programming the device.
ELECTRODES - RECOMMENDATIONS
SONOPEEL
makes the electric stimulation by microcurrent (MENS) and
microgalvanic (GMES) possible. For this purpose we use special conductive rubber
electrodes and aluminum/vegetal cloth plate electrodes which are provided with the
equipment.
The size (area in cm²) of the electrodes used in electrostimulation is very important:
We recommend you to use only the electrodes which are provided as
accessories in the size of 3 cm X 5 cm. The application method of these
electrodes is very simple. In general, the electrodes of 3 cm X 5 cm which are
used, accommodate perfectly on several parts of the body causing a deep effect
in the tissues and a comfortable treatment to the patient.
