Manual de Operação - SONOPEEL
1
a
edição (10/2009)
37
UP/DOWN
control Keys (9) blue channel – PEELING INTENSITY; once pressed
the START key, the equipment starts executing the parameters chosen by the operator.
At this moment the UP/DOWN keys (blue colored) start operating, increasing or
reducing the ultrasound peeling intensity (Three
“steps”
– Low, Medium and High).
As seen up to now, the panel of SONOPEEL is self-explanatory, just take a couple of
minutes handling it to be familiar to the way of programming it.
Example: Let us suppose that in clinical practice or literature pulsed ULTRASONIC
PEELING with application time of 15 minutes is suggested. Turn on the equipment.
The “default” programming, described in the preceding page, will be executed. Note
the cursor flashing in the field CONT (figure 17).
Figure 17.
Liquid crystal display ready for the selection of the desired parameters.
1-
Choosing the Pulsed mode for ultrasound peeling:
Press the SET+ key until PULS (pulsed) is displayed in the field PEELING MODE. At
this moment the liquid crystal display is shown as indicated in figure 18.
Figure 18.
Liquid crystal display and selection of the adequate parameters for the
therapy, PULS (pulsed ultrasound).
2- Choosing the application time of 15 minutes:
