IBP HL 168 V 92, Manual

Page: 39 / 88

15
how to measure 10
c) Press the central part of whole LCD display. The update time is displayed for 3 seconds. The measuring
blood pressure symbol will flash on the display and then the air pressure tends automatically to be on the
high level of 195 mmHg. The air pressure will automatically increase to the required level for measurement.
Do not move or talk in the midst of taking blood pressure measurement.
d) After the air pressure is increased, it will slowly decreased. When the pulse rate is detected, Heart Rate
symbol will start flashing.
e) After taking blood pressure measurement, the Systolic rate, the Diastolic rate and the Pulse Rate will
be shown on the display for 1 minute and will then be removed automatically.
D storing, recalling and erasing measurement data:
a) Storing data:
After each blood pressure measurement, the Systolic rate, diastolic rate, heart pulse rate and the time &
date of specific day will be automatically stored. The memory holds the latest 92 measurement data. If
more than 92 measurements, the memory will automatically clear out the earliest data.
b) Recalling data:
1. Pressing Recall icon at normal time, the latest recorded set of measurement which are the
Systolic rate, Diastolic rate, heart pulse, including the recording time and date, will appear and
lasting on the display for 1 minute (60 sec.).
HL 168 V92 English 14.04.2003 7:52 Uhr Seite 15