IBP HL 168 V 92, Manual

Page: 40 / 88

16
10 how to measure / general
2. Press Recall icon to read the next line of stored data. The data called up on the display is numbered
accordingly. After reading the recalled data as rotatory 92-set of the stored data, press Recall again to
switch to normal time.
3. To discontinue in the midst of reading of the data, press the central part of whole LCD display to
power off. The current time then reappears in the display.
c) Erasing data:
1. Take out the batteries and then refill 2 pcs batteries again.
2. To discontinue if the data is erased. Press
Recall icon, no data should show up on the screen.
E to change batteries:
When " " show up on the display, the battery is weak.
Change the batteries or it will not be possible to take blood pressure measurement.
maintenance:
- Use a piece of cloth with water or mild cleansing agent to clean the case and then use a piece of dry cloth
to wipe it dry. Wipe wrist cuff with a dry cloth if it is dirty.
- Do not use gas or any strong cleansers in cleaning.
- When the unit is not to be used for a long time, remove the batteries. (Leaking of battery liquid of
battery liquid can cause trouble).
HL 168 V92 English 14.04.2003 7:52 Uhr Seite 16