IBP HL 168 V 92, Manual

Page: 38 / 88

14
10 how to measure
A inserting batteries in position:
a) Open battery cover.
b) Refer to the picture in positioning batteries.
c) All LCD segments appear on the display in a short time.
d) Display 1 month, 1 date, 12 hours, 0 minute.
B setting Date and Time:
You may use the pointer or finger or pen whatever, to set Date, time.
a) Press
Mode icon ("month” starts flashing). Press Set icon to set the correct month.
b) Press Mode icon again ("date” starts flashing). Press Set icon to set the correct date.
c) Press Mode icon again ("hour” starts flashing). Press Set icon to set the correct hour in 12-hour format.
d) Press Mode icon again ("minute” starts flashing). Press Set icon to set the correct minute.
e) Press Mode icon again to switch to normal time (month, date, hour and minute appear on the display).
The two flashing dots after the hours indicate that the clock is active.
C steps to take blood pressure measurement:
a) Wrap the cuff around the wrist. (Refer to Wrapping of Wrist cuff as, page 11.)
b) Sit upright on the chair to have correct posture. (Refer to correct Posture in Taking Blood Pressure as,
page 12.)
HL 168 V92 English 14.04.2003 7:52 Uhr Seite 14