IBM XSERIES 255 TYPE 8685, Hardware Maintenance Manual And Troubleshooting Manual

Page: 25 / 226

Select this choice to manually enable a pair or quad of memory.
Notes:
1. A pair or quad is also known as a memory bank.
2. You cannot disable memory. Memory can only be disabled by the server.
3. For details on enabling the Hot Spare Memory feature, see the description
of the Core Chipset Control menu under Advanced Setup .
If a memory error is detected during POST or memory configuration, the
server can automatically disable the failing memory pair or quad and continue
operating with reduced memory capacity. If this occurs, you must manually
enable the memory pair or quad after the problem is corrected. Select
Memory Settings from the Advanced Setup menu, and use the arrow keys
to highlight the pair or quad that you want to enable; then, use the arrow keys
to select Enable .
Note: For details on enabling the Hot Spare Memory feature, see the
description of the Core Chipset Control menu under Advanced Setup.
– Integrated System Management Processor Settings
Select this choice to set the server to automatically restart after a
nonmaskable interrupt (NMI) occurs. The default setting for this menu item is
Enabled .
v Error Logs
Select this choice to view or clear error logs.
– Select POST Error Log to view the three most recent error codes and
messages that the system generated during POST.
Select Clear event/error logs from the POST Error Log menu to clear the
Error log.
– Select System Event/Error Log to view the System Event/Error log. The
System Event/Error log contains all the system error and warning messages
that the system has generated. You can use the arrow keys to move between
pages in the System Event/Error log.
Select Clear event/error logs from the System Event/Error Log menu to
clear the Error or Event log.
v
Save Settings
Select this choice to save your customized settings.
v
Restore Settings
Select this choice to delete your changes and restore the previous settings.
v
Load Default Settings
Select this choice to cancel your changes and restore the factory settings.
v
Exit Setup
If you have made any changes, the program will prompt you to save the changes
or exit without saving the changes.
Additional Configuration/Setup Utility menu choices
When you install an optional Remote Supervisor Adapter in your server, you can
view additional menu choices in the Configuration/Setup Utility program, such as:
v System Card Data on the System Information menu
Select this choice to view vital product data (VPD) for some server components.
v PCI Slot Information
Chapter 2. Configuration
15