1. Connect the RJ-11 connector
1
on the ASM interconnect cable to the
connector on the back of the engine as shown in the following illustration:.
4
5
6
7
2. Connect the other RJ-11 connector
2
on the ASM interconnect cable to the
lower connector on the ASM adapter.
3. For each engine you want to manage with the ASM adapter, connect an ASM
interconnect cable
4
to
5
, then connect
3
to
6
to the next engine, using
the 6-ft. Ethernet cable
7
provided.
Connecting a serial cable:
If you want to manage your engine remotely, you
need to install the serial cable to connect a modem. Connect the serial cable to the
ASM PCI adapter as shown in the following illustration:
1. Connect the serial connector on the serial cable
1
to the serial port on the
ASM adapter
2
.
2. Connect either of the two serial connectors
3
or
4
to the device you want to
connect the ASM adapter to.
82
IBM NAS 300 Service Guide
Summary of Contents for TotalStorage NAS 300
