6. Re-plug the power cord for the new power supply into the power cord connector
on the rear of the engine.
7. Re-plug the power cord into a properly grounded electrical outlet.
8. Verify that the DC Power light and AC Power light on the power supply are lit,
indicating that the power supply is operating correctly.
9. Replace the bezel. (See “Installing the cover and bezel” on page 84.)
Installing and cabling the optional Advanced System
Management (ASM) PCI adapter
Each engine comes standard with a communication port dedicated to the Advanced
System Management (ASM) Processor to allow you to manage the engine at
anytime from virtually anywhere. The optional ASM PCI adapter allows you to
connect via LAN or modem from virtually anywhere for extensive remote
management. The ASM PCI adapter works in conjunction with the ASM processor
that is integrated into the base planar board of each of the two engines (an
interconnect cable that connects both engines to the ASM PCI adapter). The ASM
PCI adapter enables management through a Web browser interface, in addition to
ANSI terminal, Telnet, and Netfinity Director. The adapter installation and cabling
sequence follows:
Use an ASM PCI adapter that is connected to your ASM Interconnect bus as an
Ethernet gateway for your ASM Interconnect bus, enabling all ASM information
generated by engines attached to the ASM Interconnect bus to be forwarded to
other systems on your Ethernet network.
The ASM PCI adapter installation and cabling sequence follows:
1. Review the information in “Before you begin” on page 67 and in “Safety and
environmental notices” on page 173.
2. Power-off the engine; and disconnect all external cables and power cords
3. Remove the top cover.
Cabling the ASM interconnect (internal) cable:
1. Route the Advanced System Management Interconnect option cable as shown
in the following illustration.
Note:
The illustrations in this document might differ slightly from your hardware.
Cable clamps
Cable
80
IBM NAS 300 Service Guide
Summary of Contents for TotalStorage NAS 300
