You have finished the entire procedure.
If you want to change the COM port for the infrared
communication, go on to Assigning a COM Port for the Infrared
Port.
If you want to configure the infrared port for dial-up networking,
go on to Configuring the Infrared Port for Dial-Up Networking.
Assigning a COM Port for the Infrared Port
Setting COM 1:
If you want to assign a COM port other than the
default value (COM 1), you need to run the ThinkPad Configuration
program.
Setting COM 2:
1
Click on the Infrared Port icon in the ThinkPad Configuration
program.
2
Click on Advanced...; then click on COM2 for COM Port.
Make sure that Enable is selected for “Infrared.”
3
Shut down and restart your computer.
After you modify the registry key or value, restart the computer. The
infrared port is configured as COM2.
Configuring the Infrared Port for Dial-Up Networking
To use dial-up networking with the infrared port, you need to
configure the null-modem setting in the “Windows NT RAS setup”
window.
To set up infrared communication for dial-up networking:
1
Double-click on the Network icon in the Control Panel.
2
Click on the Services tab; then click on Add....
3
If you have not installed Remote Access Service, click on
Remote Access Service, and click on OK.
142
IBM ThinkPad 770X Online Book
Summary of Contents for ThinkPad 770X
